How to Convert M2TS to TS — Quick & Free
Fast, instant M2TS to TS conversion. No signup required. Just drop your .m2ts file and get .ts in seconds.
Batch Settings
Generation loss — quality may degrade
M2TS uses lossy compression, and so does TS. Converting means decoding and re-encoding — each cycle can permanently degrade quality. Convert from the original source file whenever possible.
Some metadata may not survive
Your M2TS file may contain Blu-ray metadata metadata. TS has limited or no support for these metadata types. Location data (GPS), camera settings, and color profiles may be stripped during conversion.
What compression artifacts to expect
TS lossy compression can produce codec-dependent (usually MPEG-2 blockiness). At the high quality settings CocoConvert uses by default, these are usually invisible to the eye. Lower quality settings trade visual fidelity for smaller file sizes.
M2TS格式，常用于高清摄像机录制的视频，画质细腻，细节丰富，但有时在兼容性上会遇到小麻烦。尤其是在移动设备上分享，或是需要编辑处理时，M2TS文件可能就不那么方便了。这时，将M2TS转换为TS（Transport Stream）就显得很有必要。TS格式在媒体封装上更加灵活，特别是在网络传输和流媒体应用中表现出色。它能更好地适应不同播放器和平台，让您的高清内容不再受格式限制，无论是家庭影音分享，还是专业后期制作，都能更加顺畅。转换过程不仅能保持原有画质，还能提升文件的通用性，让您的精彩瞬间随时随地都能轻松播放。
- 微信视频号上传
- 手游录像剪辑
- 智能电视播放
在中国大陆及周边地区，TS格式因其对流媒体的良好支持，在在线教育、体育赛事直播等领域有广泛应用，转换后更易于分发和观看。
About M2TS to TS Conversion
Short answer: yes, you can convert M2TS to TS online for free, and some quality differences may occur depending on the format types. Just upload your .m2ts file to CocoConvert, pick TS as the output, and click Convert. The whole process takes seconds.
Now for the details. M2TS is the Blu-ray disc transport stream format used for high-definition recordings. TS (MPEG Transport Stream) is used in broadcast television and is segmented for streaming. Converting between these two formats lets you improve file compatibility across devices.
Full Name: M2TS uses Blu-ray Transport Stream, while TS uses MPEG Transport Stream. Compression: M2TS uses Lossy, while TS uses Lossy. Color Depth: M2TS uses 8-bit, while TS uses 8-bit.
Your M2TS file is decoded and re-encoded as TS. M2TS uses lossy compression, and so does TS. Converting means decoding and re-encoding — each cycle can permanently degrade quality. Convert from the original source file whenever possible.
Common misconception: ""I'll convert to TS and then back to M2TS — it'll be the same"" — in reality, each lossy conversion cycle permanently degrades quality. going m2ts → ts → m2ts will produce a noticeably worse file than the original. always keep your source file.
CocoConvert runs entirely online — no software to install, no account to create. Your files are encrypted during upload (TLS), processed on isolated servers in Germany, and permanently deleted after 24 hours. It works in Chrome, Safari, Firefox, Edge, and all mobile browsers.
Need to convert more than one file? Free users can do 5 per hour. Pro gets 100 per hour with files up to 5 GB each.
How to Convert M2TS to TS
- 1
1. Upload M2TS
Drop your .m2ts file onto the page (or tap "Browse" on mobile). Add multiple files for batch conversion.
- 2
2. Select TS
Choose .ts from the output dropdown. Settings are pre-configured for best results.
- 3
3. Convert
One click. The server handles all the heavy lifting using FFmpeg and Sharp.
- 4
4. Download
Your .ts file is ready. Download it directly or get all files as a zip archive.
What Happens When You Convert M2TS to TS
Your M2TS video is transcoded — video and audio streams are decoded and re-encoded into the TS container. This is a lossy process that takes time proportional to the video duration.
Your M2TS file is demuxed — video, audio, and subtitle streams are separated
The video stream is decoded frame-by-frame, then re-encoded with TS-compatible codecs (typically H.264 for MP4)
The audio stream is decoded and re-encoded (or copied if the codec is compatible)
Subtitle and chapter data is preserved where the target supports it
Streams are muxed into the TS container and the file is saved
M2TS vs TS — Detailed Comparison
| Feature | .M2TS | .TS |
|---|---|---|
| Full Name | Blu-ray Transport Stream | MPEG Transport Stream |
| Compression | Lossy | Lossy |
| Color Depth | 8-bit | 8-bit |
| HDR Support | No | No |
| Typical File Size | 200–500 MB per minute (Blu-ray quality) | 100–300 MB per minute |
| Platform Support | Limited | Very Wide |
| Browser Support | none | Limited |
| Year Created | 2006 | 1995 |
| Open Standard | No | Yes |
Should You Convert M2TS to TS?
When to Convert
- ✓Your M2TS file won't open on a recipient's device or in an application
- ✓A website, service, or platform only accepts TS uploads
When NOT to Convert
- ✗You're converting just because the file "seems old" — re-encoding lossy-to-lossy always degrades quality
Common Mistakes When Converting M2TS to TS
"I'll convert to TS and then back to M2TS — it'll be the same"
Each lossy conversion cycle permanently degrades quality. Going M2TS → TS → M2TS will produce a noticeably worse file than the original. Always keep your source file.
Frequently Asked Questions
Is M2TS to TS conversion free?
Yes. CocoConvert offers free M2TS to TS conversion with generous daily limits — 25 minutes of processing time and up to 5 files per hour (250 MB each). Pro plans remove these limits.
How fast is M2TS to TS conversion?
Most files convert in 2–10 seconds depending on size. Large video files may take 30 seconds. Batch jobs process in parallel for maximum speed.
What happens to my files after conversion?
Your uploaded M2TS file and the converted TS file are both automatically deleted from our servers within 24 hours. They are never shared, sold, or analysed.
Does converting M2TS to TS lose quality?
M2TS uses lossy compression, and so does TS. Converting means decoding and re-encoding — each cycle can permanently degrade quality. Convert from the original source file whenever possible.
Can I convert TS back to M2TS?
Yes, CocoConvert supports TS to M2TS conversion as well. However, if the original conversion involved lossy compression, converting back won't recover the lost data.
Versions are pinned in our worker Dockerfile and re-built via CI on every change.